Electronic Components

Board spacer

KITAGAWA INDUSTRIES PC Board Spacers. A variety of PC Board Spacers for securing PC Board to chassis and securing components on metal plate which contribute to improve workability and light weight are available.

Hole securing type

PC Board Spacers with hole securing type are available in the list.

LOCKING CARDSPACER KGLS-S

Provides simultaneous functions of spacing and supporting for PCB and chassis.

LOCKING CARDSPACER KLCS

Provides simultaneous functions of spacing and supporting for PCB and chassis.

LOCKING CARDSPACER KGSL-M

Provides simultaneous functions of spacing and supporting for PCB and chassis.

RE-USE SPACER RLS

Holding and spacing for PC boards and chassis.

RE-USE CARDSPACER RPS

Snap is easily removed to shorten time for maintenance and disassembling.

CARDSPACER KGPS-S

Supports heavily loaded PCB at the centre.

MINI CARDSPACER MPS

Space-saving type, with support at the centre of PCB.

LOCKING CARDSPACER KGLS-RTBM

Dust resistant performance is performed by bowl shaped snap mounted from chassis bottom.

LOCKING CARDSPACER KGLS-RT

Dome head snap mounted from underside of chassis, seals the hole from dust intrusion.

CARDSPACER KGPS-RTBM

Dust resistant performance is performed by bowl shaped snap mounted from chassis bottom.

CARDSPACER KGPS-RF

Provides spacing and support at the centre of PCB.

LOCKING CARDSPACER FOR WOODEN CHASSIS KGLS-04T

Spacing and securing for PCB and chassis.

CARD EDGE SPACER CESP-55

PC board spacer that stabilise edge of PC board by simply pressing it onto this product.

CORNER POST KGCP KGCP-08-0

Requires no mounting hole and occupies only 6mm square.

PIERCE HOLD PHD

PCB can be mounted and opened for access to the backside for maintenance.

REUSABLE PIERCE HOLD RPH

PCB can be mounted and opened for access to the backside for maintenance

REUSABLE EDGE SPACER RES

Easily mount and dismount PCB by pushing down the lever.

TAPPING CARDSPACER KGTS-T

PCB can be mounted and opened for access to the backside for maintenance.

EXPANSION NUT ES

Provides xation of panel to panel and component to panel, as well as spacing between them.

TOGGLE FIXER TFR

Spacing and xation for panels and components.

NYLON PUSH RIVET P-SN

Permanent xation of two chassis by simply pushing down the rivet.

NYLON RIVET RVT

Permanent xation of two chassis by simply pushing down the rivet.

RIVET NRK

Insertion forces realized in consideration of assembly.

CARD CORNER HOLDER KGCH KGCH-20-0

Space-saving holder allows mounting of sub-PCB onto chassis or main-PCB.

REUSABLE CARD HOLDER RCH-40-V0 RCH

Space-saving, sub-PCB holder for installation on chassis or main-PCB.

Slide-in type

PC Board Spacers with slide-in securing type are available in the list.

CARD FIXER UEGR

Low-cost and space saving card guide.

GUIDE RAIL GR-45A GR-45A

Space-saving card guide can be installed on both sides of PCB by using the same holes.

CARD GUIDE WITH STOPPER GR-170SS GR-170SS

Stopper prevents PCB from undesired removal.

EJECTOR CBE-15

Complied with RoHS Directive 2011/65/EU

EJECTOR EJC-1A

Special ejector for CARD GUIDE WITH STOPPER Easy extraction of PCB.

EJECTOR CBE-18

CBE-18 provides easy dismounting of PCB for maintenance.

EJECTOR CBE

Provides easy extraction of a connected PCB by using leverage.

Adhesives type

PC Board Spacers with adhesives type are available in the list.

Screw type

PC Board Spacers with screw securing type are available in the list.

COLLAR BUSH KCB-310-V0

Screw fixing collar bush functions as a spacer for PCBs 

ONE TOUCH COLLAR BUSHING NB-300

Combination of a bushing and a collar provides various spacing height.

ONE TOUCH COLLAR BUSHING NB-400

Combination of a bushing and a collar provides various spacing height.

ONE TOUCH COLLAR BUSHING NA

Combination of a bushing and a collar provides various spacing height.

ONE TOUCH COLLAR BUSHING TA-3xx

Combination of a bushing and a collar provides various spacing height.

ONE TOUCH COLLAR BUSHING TB-300

Combination of a bushing and a collar provides various spacing height.